I downloaded 0.37.0 pre-release the other day and installed it. I couldn’t compile the preview. Then I installed 0.36.1 and it still couldn’t compile.
I tried running the uninstall script https://gist.github.com/Tapped/daa78c08882f33b0c7c3 and then re-install 0.36.1 but still no success.
My first install of 0.36.1 gave the following (contents of https://api.fusetools.com/packages/v1/nuget/v2 at the end of this post):
$ fuse preview
Fuse 0.36.1 (build 12010)
Build started: FullCompile
Configuring
ERROR: Could not connect to the feed specified at 'https://api.fusetools.com/packages/v1/nuget/v2'. Please verify that the package source (located in the Package Manager Settings) is valid and ensure your network connectivity.
Veckoappen.unoproj: E0100: Package 'UnoCore' was not found
/Users/jhsware/Fuse/Veckoappen/Veckoappen.unoproj(1,1): Error E0100: Package 'UnoCore' was not found
Fuse (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.4 s)
ERROR: Could not connect to the feed specified at 'https://api.fusetools.com/packages/v1/nuget/v2'. Please verify that the package source (located in the Package Manager Settings) is valid and ensure your network connectivity.
(unknown): E0100: Package Fuse.Android:0.47.7 was not found
?: Error E0100: Package Fuse.Android:0.47.7 was not found
Fuse.Common (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.4 s)
Fuse.Platform (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.8 s)
Uno.Net.Sockets (0.47.13) -> ../../Library/Application Support/Fusetools/Packages (1.4 s)
Uno.Threading (0.47.13) -> ../../Library/Application Support/Fusetools/Packages (2.4 s)
Fuse.Motion (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.5 s)
Fuse.Marshal (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.9 s)
Fuse.Nodes (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.2 s)
Fuse.Scripting (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.0 s)
Fuse.Reactive (0.47.7) -> ../../Library/Application Support/Fusetools/Packages
ERROR: Error getting response stream (ReadDone2): ReceiveFailure
(unknown): E0100: Package Fuse.Reactive:0.47.7 was not found
?: Error E0100: Package Fuse.Reactive:0.47.7 was not found
Fuse.Reactive.Expressions (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.8 s)
Fuse.Reactive (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Uno.Net.Http (0.47.13) -> ../../Library/Application Support/Fusetools/Packages (0.9 s)
ERROR: Could not connect to the feed specified at 'https://api.fusetools.com/packages/v1/nuget/v2'. Please verify that the package source (located in the Package Manager Settings) is valid and ensure your network connectivity.
(unknown): E0100: Package Uno.Testing:0.47.13 was not found
?: Error E0100: Package Uno.Testing:0.47.13 was not found
Uno.Testing (0.47.13) -> ../../Library/Application Support/Fusetools/Packages (0.6 s)
Fuse.Controls (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.9 s)
Fuse.Controls.Native (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.0 s)
Fuse.Drawing (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.8 s)
Fuse.Drawing.Planar (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.7 s)
ERROR: Could not connect to the feed specified at 'https://api.fusetools.com/packages/v1/nuget/v2'. Please verify that the package source (located in the Package Manager Settings) is valid and ensure your network connectivity.
(unknown): E0100: Package Fuse.Elements:0.47.7 was not found
?: Error E0100: Package Fuse.Elements:0.47.7 was not found
Fuse.Triggers (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.7 s)
Fuse.Elements (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Experimental.Http (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.7 s)
Fuse.Designer (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Fuse.Gestures (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (3.3 s)
Fuse.Navigation (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.1 s)
Fuse.Controls.Navigation (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.7 s)
Fuse.Controls.Panels (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Fuse.Controls.Primitives (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (12.1 s)
Fuse.Drawing.Paths (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.6 s)
Fuse.Drawing.Polygons (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.9 s)
Fuse.Drawing.Primitives (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.8 s)
Fuse.Effects (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.4 s)
Fuse.Text (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.1 s)
Fuse.Controls.ScrollView (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.0 s)
Fuse.Controls.Video (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (3.4 s)
Fuse.Controls.WebView (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.0 s)
Fuse.iOS (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.2 s)
Fuse.Desktop (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.7 s)
Fuse.FileSystem (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.1 s)
Fuse.Physics (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.5 s)
Fuse.Reactive.JavaScript (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (2.0 s)
Fuse.Scripting.Duktape (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (4.3 s)
Fuse.Scripting.JavaScriptCore (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.8 s)
Fuse.Scripting.Jurassic (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Fuse.Scripting.V8 (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.7 s)
Fuse.Selection (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.6 s)
Fuse.Storage (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.8 s)
Fuse.UserEvents (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.9 s)
Fuse.GeoLocation (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.0 s)
Fuse.iOS.LocationPermissions (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (1.8 s)
Uno.Permissions (0.47.13) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Fuse.Launcher.Maps (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.6 s)
Fuse.Launcher.Phone (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.6 s)
FuseJS (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Fuse.WebSockets (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (4.1 s)
Polyfills.Window (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.0 s)
Fuse.LocalNotifications (0.47.7) -> ../../Library/Application Support/Fusetools/Packages (0.8 s)
Build completed in 308.67 seconds
10 errors
Build ended
fuse: Failed to compile project
And now I am getting:
$ fuse preview
Fuse 0.36.1 (build 12010)
Build started: FullCompile
Configuring
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4805): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4805,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4805): E3111: Fuse.Scripting does not contain type or namespace 'IScriptObject'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4805,1): Error E3111: Fuse.Scripting does not contain type or namespace 'IScriptObject'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7733): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7733,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7733): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7733,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(11): E3114: There is no identifier named 'Behavior' accessible in this scope. Did you mean 'Behavior' (as in Fuse.Behavior) or 'Behavior' (as in Fuse.Behavior)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(11,1): Error E3114: There is no identifier named 'Behavior' accessible in this scope. Did you mean 'Behavior' (as in Fuse.Behavior) or 'Behavior' (as in Fuse.Behavior)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(162): E3114: There is no identifier named 'UnhandledExceptionArgs' accessible in this scope. Did you mean 'UnhandledExceptionArgs' (as in Fuse.UnhandledExceptionArgs) or 'UnhandledExceptionArgs' (as in Fuse.UnhandledExceptionArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(162,1): Error E3114: There is no identifier named 'UnhandledExceptionArgs' accessible in this scope. Did you mean 'UnhandledExceptionArgs' (as in Fuse.UnhandledExceptionArgs) or 'UnhandledExceptionArgs' (as in Fuse.UnhandledExceptionArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(434): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(434,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(691): E3114: There is no identifier named 'Diagnostic' accessible in this scope. Did you mean 'Diagnostic' (as in Fuse.Diagnostic) or 'Diagnostic' (as in Fuse.Diagnostic)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(691,1): Error E3114: There is no identifier named 'Diagnostic' accessible in this scope. Did you mean 'Diagnostic' (as in Fuse.Diagnostic) or 'Diagnostic' (as in Fuse.Diagnostic)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2118): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2118,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2236): E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2236,1): Error E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2260): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2260,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2635): E3114: There is no identifier named 'ISoftDisposable' accessible in this scope. Did you mean 'ISoftDisposable' (as in Fuse.Resources.ISoftDisposable) or 'ISoftDisposable' (as in Fuse.Resources.ISoftDisposable)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2635,1): Error E3114: There is no identifier named 'ISoftDisposable' accessible in this scope. Did you mean 'ISoftDisposable' (as in Fuse.Resources.ISoftDisposable) or 'ISoftDisposable' (as in Fuse.Resources.ISoftDisposable)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2976): E3114: There is no identifier named 'HitTestResult' accessible in this scope. Did you mean 'HitTestResult' (as in Fuse.HitTestResult) or 'HitTestResult' (as in Fuse.HitTestResult)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2976,1): Error E3114: There is no identifier named 'HitTestResult' accessible in this scope. Did you mean 'HitTestResult' (as in Fuse.HitTestResult) or 'HitTestResult' (as in Fuse.HitTestResult)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3120): E3114: There is no identifier named 'ICommonViewport' accessible in this scope. Did you mean 'ICommonViewport' (as in Fuse.ICommonViewport) or 'ICommonViewport' (as in Fuse.ICommonViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3120,1): Error E3114: There is no identifier named 'ICommonViewport' accessible in this scope. Did you mean 'ICommonViewport' (as in Fuse.ICommonViewport) or 'ICommonViewport' (as in Fuse.ICommonViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3150): E3114: There is no identifier named 'ICommonViewport' accessible in this scope. Did you mean 'ICommonViewport' (as in Fuse.ICommonViewport) or 'ICommonViewport' (as in Fuse.ICommonViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3150,1): Error E3114: There is no identifier named 'ICommonViewport' accessible in this scope. Did you mean 'ICommonViewport' (as in Fuse.ICommonViewport) or 'ICommonViewport' (as in Fuse.ICommonViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3256): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3256,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3256): E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3256,1): Error E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3304): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3304,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4175): E3114: There is no identifier named 'Behavior' accessible in this scope. Did you mean 'Behavior' (as in Fuse.Behavior) or 'Behavior' (as in Fuse.Behavior)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4175,1): Error E3114: There is no identifier named 'Behavior' accessible in this scope. Did you mean 'Behavior' (as in Fuse.Behavior) or 'Behavior' (as in Fuse.Behavior)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4368): E3114: There is no identifier named 'NodeGroupBase' accessible in this scope. Did you mean 'NodeGroupBase' (as in Fuse.NodeGroupBase) or 'NodeGroupBase' (as in Fuse.NodeGroupBase)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4368,1): Error E3114: There is no identifier named 'NodeGroupBase' accessible in this scope. Did you mean 'NodeGroupBase' (as in Fuse.NodeGroupBase) or 'NodeGroupBase' (as in Fuse.NodeGroupBase)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5746): E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5746,1): Error E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5899): E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5899,1): Error E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6593): E3114: There is no identifier named 'RequestBringIntoViewArgs' accessible in this scope. Did you mean 'RequestBringIntoViewArgs' (as in Fuse.RequestBringIntoViewArgs) or 'RequestBringIntoViewArgs' (as in Fuse.RequestBringIntoViewArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6593,1): Error E3114: There is no identifier named 'RequestBringIntoViewArgs' accessible in this scope. Did you mean 'RequestBringIntoViewArgs' (as in Fuse.RequestBringIntoViewArgs) or 'RequestBringIntoViewArgs' (as in Fuse.RequestBringIntoViewArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8225): E3114: There is no identifier named 'IFrustum' accessible in this scope. Did you mean 'IFrustum' (as in Fuse.IFrustum) or 'IFrustum' (as in Fuse.IFrustum)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8225,1): Error E3114: There is no identifier named 'IFrustum' accessible in this scope. Did you mean 'IFrustum' (as in Fuse.IFrustum) or 'IFrustum' (as in Fuse.IFrustum)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8338): E3114: There is no identifier named 'IFrustum' accessible in this scope. Did you mean 'IFrustum' (as in Fuse.IFrustum) or 'IFrustum' (as in Fuse.IFrustum)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8338,1): Error E3114: There is no identifier named 'IFrustum' accessible in this scope. Did you mean 'IFrustum' (as in Fuse.IFrustum) or 'IFrustum' (as in Fuse.IFrustum)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9116): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9116,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9116): E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9116,1): Error E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9366): E3114: There is no identifier named 'ITransformMode' accessible in this scope. Did you mean 'ITransformMode' (as in Fuse.ITransformMode) or 'ITransformMode' (as in Fuse.ITransformMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9366,1): Error E3114: There is no identifier named 'ITransformMode' accessible in this scope. Did you mean 'ITransformMode' (as in Fuse.ITransformMode) or 'ITransformMode' (as in Fuse.ITransformMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9373): E3114: There is no identifier named 'IScalingMode' accessible in this scope. Did you mean 'IScalingMode' (as in Fuse.IScalingMode) or 'IScalingMode' (as in Fuse.IScalingMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9373,1): Error E3114: There is no identifier named 'IScalingMode' accessible in this scope. Did you mean 'IScalingMode' (as in Fuse.IScalingMode) or 'IScalingMode' (as in Fuse.IScalingMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9403): E3114: There is no identifier named RelativeTransform<> accessible in this scope. Did you mean RelativeTransform`1 (as in Fuse.RelativeTransform`1) or RelativeTransform`1 (as in Fuse.RelativeTransform`1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9403,1): Error E3114: There is no identifier named RelativeTransform<> accessible in this scope. Did you mean RelativeTransform`1 (as in Fuse.RelativeTransform`1) or RelativeTransform`1 (as in Fuse.RelativeTransform`1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9403): E3114: There is no identifier named 'IScalingMode' accessible in this scope. Did you mean 'IScalingMode' (as in Fuse.IScalingMode) or 'IScalingMode' (as in Fuse.IScalingMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9403,1): Error E3114: There is no identifier named 'IScalingMode' accessible in this scope. Did you mean 'IScalingMode' (as in Fuse.IScalingMode) or 'IScalingMode' (as in Fuse.IScalingMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9686): E3114: There is no identifier named 'Font' accessible in this scope. Did you mean 'Font' (as in Fuse.Text.Font), 'Font' (as in Fuse.Font) or 'Font' (as in Fuse.Font)? For example, try adding 'using Fuse.Text;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9686,1): Error E3114: There is no identifier named 'Font' accessible in this scope. Did you mean 'Font' (as in Fuse.Text.Font), 'Font' (as in Fuse.Font) or 'Font' (as in Fuse.Font)? For example, try adding 'using Fuse.Text;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9874): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9874,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9911): E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(9911,1): Error E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10034): E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10034,1): Error E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10150): E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10150,1): Error E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10150): E3114: There is no identifier named 'ITransformRelative' accessible in this scope. Did you mean 'ITransformRelative' (as in Fuse.ITransformRelative) or 'ITransformRelative' (as in Fuse.ITransformRelative)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10150,1): Error E3114: There is no identifier named 'ITransformRelative' accessible in this scope. Did you mean 'ITransformRelative' (as in Fuse.ITransformRelative) or 'ITransformRelative' (as in Fuse.ITransformRelative)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10151): E3114: There is no identifier named 'ITransformMode' accessible in this scope. Did you mean 'ITransformMode' (as in Fuse.ITransformMode) or 'ITransformMode' (as in Fuse.ITransformMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10151,1): Error E3114: There is no identifier named 'ITransformMode' accessible in this scope. Did you mean 'ITransformMode' (as in Fuse.ITransformMode) or 'ITransformMode' (as in Fuse.ITransformMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10275): E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10275,1): Error E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10306): E3114: There is no identifier named 'PlacedArgs' accessible in this scope. Did you mean 'PlacedArgs' (as in Fuse.PlacedArgs) or 'PlacedArgs' (as in Fuse.PlacedArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10306,1): Error E3114: There is no identifier named 'PlacedArgs' accessible in this scope. Did you mean 'PlacedArgs' (as in Fuse.PlacedArgs) or 'PlacedArgs' (as in Fuse.PlacedArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10315): E3114: There is no identifier named 'ITransformMode' accessible in this scope. Did you mean 'ITransformMode' (as in Fuse.ITransformMode) or 'ITransformMode' (as in Fuse.ITransformMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10315,1): Error E3114: There is no identifier named 'ITransformMode' accessible in this scope. Did you mean 'ITransformMode' (as in Fuse.ITransformMode) or 'ITransformMode' (as in Fuse.ITransformMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10322): E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10322,1): Error E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10329): E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10329,1): Error E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10345): E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10345,1): Error E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10403): E3114: There is no identifier named RelativeTransform<> accessible in this scope. Did you mean RelativeTransform`1 (as in Fuse.RelativeTransform`1) or RelativeTransform`1 (as in Fuse.RelativeTransform`1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10403,1): Error E3114: There is no identifier named RelativeTransform<> accessible in this scope. Did you mean RelativeTransform`1 (as in Fuse.RelativeTransform`1) or RelativeTransform`1 (as in Fuse.RelativeTransform`1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10403): E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(10403,1): Error E3114: There is no identifier named 'ITranslationMode' accessible in this scope. Did you mean 'ITranslationMode' (as in Fuse.ITranslationMode) or 'ITranslationMode' (as in Fuse.ITranslationMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(50): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(50,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(122): E3114: There is no identifier named 'PropertyBinding' accessible in this scope. Did you mean 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding) or 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding)? For example, try adding 'using Fuse.Reactive;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(122,1): Error E3114: There is no identifier named 'PropertyBinding' accessible in this scope. Did you mean 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding) or 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding)? For example, try adding 'using Fuse.Reactive;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(132): E3114: There is no identifier named 'PropertyBinding' accessible in this scope. Did you mean 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding) or 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding)? For example, try adding 'using Fuse.Reactive;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(132,1): Error E3114: There is no identifier named 'PropertyBinding' accessible in this scope. Did you mean 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding) or 'PropertyBinding' (as in Fuse.Reactive.PropertyBinding)? For example, try adding 'using Fuse.Reactive;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(150): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/reactive/$.uno(150,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1334): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1334,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1342): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1342,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1350): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1350,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1358): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1358,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1373): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1373,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1381): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1381,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1390): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1390,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1403): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1403,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1411): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1411,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1420): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1420,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1432): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1432,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1440): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1440,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1449): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1449,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1462): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1462,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1470): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1470,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1478): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1478,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1486): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1486,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1494): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1494,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1502): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1502,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1520): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1520,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1528): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1528,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1537): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1537,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1549): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1549,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1563): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1563,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1577): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1577,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1594): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1594,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1603): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1603,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1613): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1613,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1628): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1628,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1636): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1636,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1662): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1662,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1723): E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1723,1): Error E3114: There is no identifier named 'Easing' accessible in this scope. Did you mean 'Easing' (as in Fuse.Animations.Easing) or 'Easing' (as in Fuse.Animations.Easing)? For example, try adding 'using Fuse.Animations;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(131): E3114: There is no identifier named 'DisposalPolicy' accessible in this scope. Did you mean 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy) or 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(131,1): Error E3114: There is no identifier named 'DisposalPolicy' accessible in this scope. Did you mean 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy) or 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(164): E3114: There is no identifier named 'DisposalPolicy' accessible in this scope. Did you mean 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy) or 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(164,1): Error E3114: There is no identifier named 'DisposalPolicy' accessible in this scope. Did you mean 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy) or 'DisposalPolicy' (as in Fuse.Resources.DisposalPolicy)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(217): E3114: There is no identifier named 'IDeferredDisposable' accessible in this scope. Did you mean 'IDeferredDisposable' (as in Fuse.Resources.IDeferredDisposable) or 'IDeferredDisposable' (as in Fuse.Resources.IDeferredDisposable)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(217,1): Error E3114: There is no identifier named 'IDeferredDisposable' accessible in this scope. Did you mean 'IDeferredDisposable' (as in Fuse.Resources.IDeferredDisposable) or 'IDeferredDisposable' (as in Fuse.Resources.IDeferredDisposable)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(376): E3114: There is no identifier named IResourceConverter<> accessible in this scope. Did you mean IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1) or IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(376,1): Error E3114: There is no identifier named IResourceConverter<> accessible in this scope. Did you mean IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1) or IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(395): E3114: There is no identifier named NumericResourceConverter<> accessible in this scope. Did you mean NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1) or NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(395,1): Error E3114: There is no identifier named NumericResourceConverter<> accessible in this scope. Did you mean NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1) or NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(399): E3114: There is no identifier named NumericResourceConverter<> accessible in this scope. Did you mean NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1) or NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(399,1): Error E3114: There is no identifier named NumericResourceConverter<> accessible in this scope. Did you mean NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1) or NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(403): E3114: There is no identifier named NumericResourceConverter<> accessible in this scope. Did you mean NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1) or NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(403,1): Error E3114: There is no identifier named NumericResourceConverter<> accessible in this scope. Did you mean NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1) or NumericResourceConverter`1 (as in Fuse.Resources.NumericResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(408): E3114: There is no identifier named IResourceConverter<> accessible in this scope. Did you mean IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1) or IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(408,1): Error E3114: There is no identifier named IResourceConverter<> accessible in this scope. Did you mean IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1) or IResourceConverter`1 (as in Fuse.Resources.IResourceConverter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(478): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(478,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(587): E3114: There is no identifier named 'Behavior' accessible in this scope. Did you mean 'Behavior' (as in Fuse.Behavior) or 'Behavior' (as in Fuse.Behavior)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(587,1): Error E3114: There is no identifier named 'Behavior' accessible in this scope. Did you mean 'Behavior' (as in Fuse.Behavior) or 'Behavior' (as in Fuse.Behavior)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(629): E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(629,1): Error E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(630): E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(630,1): Error E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(631): E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(631,1): Error E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(632): E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(632,1): Error E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(633): E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(633,1): Error E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(634): E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(634,1): Error E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(635): E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/resources/$.uno(635,1): Error E3114: There is no identifier named ResourceSetter<> accessible in this scope. Did you mean ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1) or ResourceSetter`1 (as in Fuse.Resources.ResourceSetter`1)? For example, try adding 'using Fuse.Resources;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(331): E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(331,1): Error E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(347): E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(347,1): Error E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(366): E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(366,1): Error E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(372): E3114: There is no identifier named ScalarBlender<> accessible in this scope. Did you mean ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1) or ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(372,1): Error E3114: There is no identifier named ScalarBlender<> accessible in this scope. Did you mean ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1) or ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(390): E3114: There is no identifier named ScalarBlender<> accessible in this scope. Did you mean ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1) or ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(390,1): Error E3114: There is no identifier named ScalarBlender<> accessible in this scope. Did you mean ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1) or ScalarBlender`1 (as in Fuse.Internal.ScalarBlender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(408): E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(408,1): Error E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(424): E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(424,1): Error E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(440): E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/internal/$.uno(440,1): Error E3114: There is no identifier named Blender<> accessible in this scope. Did you mean Blender`1 (as in Fuse.Internal.Blender`1) or Blender`1 (as in Fuse.Internal.Blender`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(778): E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(778,1): Error E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(788): E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(788,1): Error E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(798): E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(798,1): Error E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(810): E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(810,1): Error E3114: There is no identifier named 'IScriptEvent' accessible in this scope. Did you mean 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent) or 'IScriptEvent' (as in Fuse.Scripting.IScriptEvent)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2258): E3114: There is no identifier named 'ScriptMember' accessible in this scope. Did you mean 'ScriptMember' (as in Fuse.Scripting.ScriptMember) or 'ScriptMember' (as in Fuse.Scripting.ScriptMember)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2258,1): Error E3114: There is no identifier named 'ScriptMember' accessible in this scope. Did you mean 'ScriptMember' (as in Fuse.Scripting.ScriptMember) or 'ScriptMember' (as in Fuse.Scripting.ScriptMember)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2268): E3114: There is no identifier named 'ScriptProperty' accessible in this scope. Did you mean 'ScriptProperty' (as in Fuse.Scripting.ScriptProperty), ScriptProperty`2 (as in Fuse.Scripting.ScriptProperty`2) or 'ScriptProperty' (as in Fuse.Scripting.ScriptProperty), or one of 1 other similar candidates? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2268,1): Error E3114: There is no identifier named 'ScriptProperty' accessible in this scope. Did you mean 'ScriptProperty' (as in Fuse.Scripting.ScriptProperty), ScriptProperty`2 (as in Fuse.Scripting.ScriptProperty`2) or 'ScriptProperty' (as in Fuse.Scripting.ScriptProperty), or one of 1 other similar candidates? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2282): E3114: There is no identifier named 'ScriptMember' accessible in this scope. Did you mean 'ScriptMember' (as in Fuse.Scripting.ScriptMember) or 'ScriptMember' (as in Fuse.Scripting.ScriptMember)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2282,1): Error E3114: There is no identifier named 'ScriptMember' accessible in this scope. Did you mean 'ScriptMember' (as in Fuse.Scripting.ScriptMember) or 'ScriptMember' (as in Fuse.Scripting.ScriptMember)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2294): E3114: There is no identifier named 'ScriptMethod' accessible in this scope. Did you mean 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), ScriptMethod`1 (as in Fuse.Scripting.ScriptMethod`1) or 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), or one of 1 other similar candidates? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2294,1): Error E3114: There is no identifier named 'ScriptMethod' accessible in this scope. Did you mean 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), ScriptMethod`1 (as in Fuse.Scripting.ScriptMethod`1) or 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), or one of 1 other similar candidates? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2309): E3114: There is no identifier named 'ScriptMethod' accessible in this scope. Did you mean 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), ScriptMethod`1 (as in Fuse.Scripting.ScriptMethod`1) or 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), or one of 1 other similar candidates? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/scripting/$.uno(2309,1): Error E3114: There is no identifier named 'ScriptMethod' accessible in this scope. Did you mean 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), ScriptMethod`1 (as in Fuse.Scripting.ScriptMethod`1) or 'ScriptMethod' (as in Fuse.Scripting.ScriptMethod), or one of 1 other similar candidates? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1416): E3114: There is no identifier named 'IPointerEventResponder' accessible in this scope. Did you mean 'IPointerEventResponder' (as in Fuse.Input.IPointerEventResponder) or 'IPointerEventResponder' (as in Fuse.Input.IPointerEventResponder)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1416,1): Error E3114: There is no identifier named 'IPointerEventResponder' accessible in this scope. Did you mean 'IPointerEventResponder' (as in Fuse.Input.IPointerEventResponder) or 'IPointerEventResponder' (as in Fuse.Input.IPointerEventResponder)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(9): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(9,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(14): E3114: There is no identifier named 'FocusGainedArgs' accessible in this scope. Did you mean 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs) or 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(14,1): Error E3114: There is no identifier named 'FocusGainedArgs' accessible in this scope. Did you mean 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs) or 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(16): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(16,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(16): E3114: There is no identifier named 'FocusGainedHandler' accessible in this scope. Did you mean 'FocusGainedHandler' (as in Fuse.Input.FocusGainedHandler) or 'FocusGainedHandler' (as in Fuse.Input.FocusGainedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(16,1): Error E3114: There is no identifier named 'FocusGainedHandler' accessible in this scope. Did you mean 'FocusGainedHandler' (as in Fuse.Input.FocusGainedHandler) or 'FocusGainedHandler' (as in Fuse.Input.FocusGainedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(16): E3114: There is no identifier named 'FocusGainedArgs' accessible in this scope. Did you mean 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs) or 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(16,1): Error E3114: There is no identifier named 'FocusGainedArgs' accessible in this scope. Did you mean 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs) or 'FocusGainedArgs' (as in Fuse.Input.FocusGainedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(27): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(27,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(32): E3114: There is no identifier named 'FocusLostArgs' accessible in this scope. Did you mean 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs) or 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(32,1): Error E3114: There is no identifier named 'FocusLostArgs' accessible in this scope. Did you mean 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs) or 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(34): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(34,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(34): E3114: There is no identifier named 'FocusLostHandler' accessible in this scope. Did you mean 'FocusLostHandler' (as in Fuse.Input.FocusLostHandler) or 'FocusLostHandler' (as in Fuse.Input.FocusLostHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(34,1): Error E3114: There is no identifier named 'FocusLostHandler' accessible in this scope. Did you mean 'FocusLostHandler' (as in Fuse.Input.FocusLostHandler) or 'FocusLostHandler' (as in Fuse.Input.FocusLostHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(34): E3114: There is no identifier named 'FocusLostArgs' accessible in this scope. Did you mean 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs) or 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(34,1): Error E3114: There is no identifier named 'FocusLostArgs' accessible in this scope. Did you mean 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs) or 'FocusLostArgs' (as in Fuse.Input.FocusLostArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(43): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(43,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(48): E3114: There is no identifier named 'IsFocusableChangedArgs' accessible in this scope. Did you mean 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs) or 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(48,1): Error E3114: There is no identifier named 'IsFocusableChangedArgs' accessible in this scope. Did you mean 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs) or 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(50): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(50,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(50): E3114: There is no identifier named 'IsFocusableChangedHandler' accessible in this scope. Did you mean 'IsFocusableChangedHandler' (as in Fuse.Input.IsFocusableChangedHandler) or 'IsFocusableChangedHandler' (as in Fuse.Input.IsFocusableChangedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(50,1): Error E3114: There is no identifier named 'IsFocusableChangedHandler' accessible in this scope. Did you mean 'IsFocusableChangedHandler' (as in Fuse.Input.IsFocusableChangedHandler) or 'IsFocusableChangedHandler' (as in Fuse.Input.IsFocusableChangedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(50): E3114: There is no identifier named 'IsFocusableChangedArgs' accessible in this scope. Did you mean 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs) or 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(50,1): Error E3114: There is no identifier named 'IsFocusableChangedArgs' accessible in this scope. Did you mean 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs) or 'IsFocusableChangedArgs' (as in Fuse.Input.IsFocusableChangedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(226): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(226,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(535): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(535,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(573): E3114: There is no identifier named 'KeyEventArgs' accessible in this scope. Did you mean 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs), 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs) or 'KeyEventArgs' (as in Uno.Platform.KeyEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(573,1): Error E3114: There is no identifier named 'KeyEventArgs' accessible in this scope. Did you mean 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs), 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs) or 'KeyEventArgs' (as in Uno.Platform.KeyEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(584): E3114: There is no identifier named 'KeyPressedArgs' accessible in this scope. Did you mean 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs) or 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(584,1): Error E3114: There is no identifier named 'KeyPressedArgs' accessible in this scope. Did you mean 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs) or 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(586): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(586,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(586): E3114: There is no identifier named 'KeyPressedHandler' accessible in this scope. Did you mean 'KeyPressedHandler' (as in Fuse.Input.KeyPressedHandler) or 'KeyPressedHandler' (as in Fuse.Input.KeyPressedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(586,1): Error E3114: There is no identifier named 'KeyPressedHandler' accessible in this scope. Did you mean 'KeyPressedHandler' (as in Fuse.Input.KeyPressedHandler) or 'KeyPressedHandler' (as in Fuse.Input.KeyPressedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(586): E3114: There is no identifier named 'KeyPressedArgs' accessible in this scope. Did you mean 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs) or 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(586,1): Error E3114: There is no identifier named 'KeyPressedArgs' accessible in this scope. Did you mean 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs) or 'KeyPressedArgs' (as in Fuse.Input.KeyPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(594): E3114: There is no identifier named 'KeyEventArgs' accessible in this scope. Did you mean 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs), 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs) or 'KeyEventArgs' (as in Uno.Platform.KeyEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(594,1): Error E3114: There is no identifier named 'KeyEventArgs' accessible in this scope. Did you mean 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs), 'KeyEventArgs' (as in Fuse.Input.KeyEventArgs) or 'KeyEventArgs' (as in Uno.Platform.KeyEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(605): E3114: There is no identifier named 'KeyReleasedArgs' accessible in this scope. Did you mean 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs) or 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(605,1): Error E3114: There is no identifier named 'KeyReleasedArgs' accessible in this scope. Did you mean 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs) or 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(607): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(607,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(607): E3114: There is no identifier named 'KeyReleasedHandler' accessible in this scope. Did you mean 'KeyReleasedHandler' (as in Fuse.Input.KeyReleasedHandler) or 'KeyReleasedHandler' (as in Fuse.Input.KeyReleasedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(607,1): Error E3114: There is no identifier named 'KeyReleasedHandler' accessible in this scope. Did you mean 'KeyReleasedHandler' (as in Fuse.Input.KeyReleasedHandler) or 'KeyReleasedHandler' (as in Fuse.Input.KeyReleasedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(607): E3114: There is no identifier named 'KeyReleasedArgs' accessible in this scope. Did you mean 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs) or 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(607,1): Error E3114: There is no identifier named 'KeyReleasedArgs' accessible in this scope. Did you mean 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs) or 'KeyReleasedArgs' (as in Fuse.Input.KeyReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(711): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(711,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(789): E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(789,1): Error E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(800): E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(800,1): Error E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(807): E3114: There is no identifier named 'PointerPressedArgs' accessible in this scope. Did you mean 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs) or 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(807,1): Error E3114: There is no identifier named 'PointerPressedArgs' accessible in this scope. Did you mean 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs) or 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(809): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(809,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(809): E3114: There is no identifier named 'PointerPressedHandler' accessible in this scope. Did you mean 'PointerPressedHandler' (as in Fuse.Input.PointerPressedHandler) or 'PointerPressedHandler' (as in Fuse.Input.PointerPressedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(809,1): Error E3114: There is no identifier named 'PointerPressedHandler' accessible in this scope. Did you mean 'PointerPressedHandler' (as in Fuse.Input.PointerPressedHandler) or 'PointerPressedHandler' (as in Fuse.Input.PointerPressedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(809): E3114: There is no identifier named 'PointerPressedArgs' accessible in this scope. Did you mean 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs) or 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(809,1): Error E3114: There is no identifier named 'PointerPressedArgs' accessible in this scope. Did you mean 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs) or 'PointerPressedArgs' (as in Fuse.Input.PointerPressedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(820): E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(820,1): Error E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(827): E3114: There is no identifier named 'PointerMovedArgs' accessible in this scope. Did you mean 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs) or 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(827,1): Error E3114: There is no identifier named 'PointerMovedArgs' accessible in this scope. Did you mean 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs) or 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(829): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(829,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(829): E3114: There is no identifier named 'PointerMovedHandler' accessible in this scope. Did you mean 'PointerMovedHandler' (as in Fuse.Input.PointerMovedHandler) or 'PointerMovedHandler' (as in Fuse.Input.PointerMovedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(829,1): Error E3114: There is no identifier named 'PointerMovedHandler' accessible in this scope. Did you mean 'PointerMovedHandler' (as in Fuse.Input.PointerMovedHandler) or 'PointerMovedHandler' (as in Fuse.Input.PointerMovedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(829): E3114: There is no identifier named 'PointerMovedArgs' accessible in this scope. Did you mean 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs) or 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(829,1): Error E3114: There is no identifier named 'PointerMovedArgs' accessible in this scope. Did you mean 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs) or 'PointerMovedArgs' (as in Fuse.Input.PointerMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(840): E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(840,1): Error E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(847): E3114: There is no identifier named 'PointerReleasedArgs' accessible in this scope. Did you mean 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs) or 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(847,1): Error E3114: There is no identifier named 'PointerReleasedArgs' accessible in this scope. Did you mean 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs) or 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(849): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(849,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(849): E3114: There is no identifier named 'PointerReleasedHandler' accessible in this scope. Did you mean 'PointerReleasedHandler' (as in Fuse.Input.PointerReleasedHandler) or 'PointerReleasedHandler' (as in Fuse.Input.PointerReleasedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(849,1): Error E3114: There is no identifier named 'PointerReleasedHandler' accessible in this scope. Did you mean 'PointerReleasedHandler' (as in Fuse.Input.PointerReleasedHandler) or 'PointerReleasedHandler' (as in Fuse.Input.PointerReleasedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(849): E3114: There is no identifier named 'PointerReleasedArgs' accessible in this scope. Did you mean 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs) or 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(849,1): Error E3114: There is no identifier named 'PointerReleasedArgs' accessible in this scope. Did you mean 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs) or 'PointerReleasedArgs' (as in Fuse.Input.PointerReleasedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(860): E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(860,1): Error E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(866): E3114: There is no identifier named 'PointerEnteredArgs' accessible in this scope. Did you mean 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs) or 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(866,1): Error E3114: There is no identifier named 'PointerEnteredArgs' accessible in this scope. Did you mean 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs) or 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(868): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(868,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(868): E3114: There is no identifier named 'PointerEnteredHandler' accessible in this scope. Did you mean 'PointerEnteredHandler' (as in Fuse.Input.PointerEnteredHandler) or 'PointerEnteredHandler' (as in Fuse.Input.PointerEnteredHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(868,1): Error E3114: There is no identifier named 'PointerEnteredHandler' accessible in this scope. Did you mean 'PointerEnteredHandler' (as in Fuse.Input.PointerEnteredHandler) or 'PointerEnteredHandler' (as in Fuse.Input.PointerEnteredHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(868): E3114: There is no identifier named 'PointerEnteredArgs' accessible in this scope. Did you mean 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs) or 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(868,1): Error E3114: There is no identifier named 'PointerEnteredArgs' accessible in this scope. Did you mean 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs) or 'PointerEnteredArgs' (as in Fuse.Input.PointerEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(879): E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(879,1): Error E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(886): E3114: There is no identifier named 'PointerLeftArgs' accessible in this scope. Did you mean 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs) or 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(886,1): Error E3114: There is no identifier named 'PointerLeftArgs' accessible in this scope. Did you mean 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs) or 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(888): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(888,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(888): E3114: There is no identifier named 'PointerLeftHandler' accessible in this scope. Did you mean 'PointerLeftHandler' (as in Fuse.Input.PointerLeftHandler) or 'PointerLeftHandler' (as in Fuse.Input.PointerLeftHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(888,1): Error E3114: There is no identifier named 'PointerLeftHandler' accessible in this scope. Did you mean 'PointerLeftHandler' (as in Fuse.Input.PointerLeftHandler) or 'PointerLeftHandler' (as in Fuse.Input.PointerLeftHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(888): E3114: There is no identifier named 'PointerLeftArgs' accessible in this scope. Did you mean 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs) or 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(888,1): Error E3114: There is no identifier named 'PointerLeftArgs' accessible in this scope. Did you mean 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs) or 'PointerLeftArgs' (as in Fuse.Input.PointerLeftArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(899): E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(899,1): Error E3114: There is no identifier named 'PointerEventArgs' accessible in this scope. Did you mean 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs), 'PointerEventArgs' (as in Fuse.Input.PointerEventArgs) or 'PointerEventArgs' (as in Uno.Platform.PointerEventArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(906): E3114: There is no identifier named 'PointerWheelMovedArgs' accessible in this scope. Did you mean 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs) or 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(906,1): Error E3114: There is no identifier named 'PointerWheelMovedArgs' accessible in this scope. Did you mean 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs) or 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(908): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(908,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(908): E3114: There is no identifier named 'PointerWheelMovedHandler' accessible in this scope. Did you mean 'PointerWheelMovedHandler' (as in Fuse.Input.PointerWheelMovedHandler) or 'PointerWheelMovedHandler' (as in Fuse.Input.PointerWheelMovedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(908,1): Error E3114: There is no identifier named 'PointerWheelMovedHandler' accessible in this scope. Did you mean 'PointerWheelMovedHandler' (as in Fuse.Input.PointerWheelMovedHandler) or 'PointerWheelMovedHandler' (as in Fuse.Input.PointerWheelMovedHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(908): E3114: There is no identifier named 'PointerWheelMovedArgs' accessible in this scope. Did you mean 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs) or 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(908,1): Error E3114: There is no identifier named 'PointerWheelMovedArgs' accessible in this scope. Did you mean 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs) or 'PointerWheelMovedArgs' (as in Fuse.Input.PointerWheelMovedArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1511): E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1511,1): Error E3114: There is no identifier named 'VisualEventArgs' accessible in this scope. Did you mean 'VisualEventArgs' (as in Fuse.VisualEventArgs) or 'VisualEventArgs' (as in Fuse.VisualEventArgs)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1526): E3114: There is no identifier named 'TextEnteredArgs' accessible in this scope. Did you mean 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs) or 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1526,1): Error E3114: There is no identifier named 'TextEnteredArgs' accessible in this scope. Did you mean 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs) or 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1528): E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1528,1): Error E3114: There is no identifier named VisualEvent<,> accessible in this scope. Did you mean VisualEvent`2 (as in Fuse.VisualEvent`2) or VisualEvent`2 (as in Fuse.VisualEvent`2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1528): E3114: There is no identifier named 'TextEnteredHandler' accessible in this scope. Did you mean 'TextEnteredHandler' (as in Fuse.Input.TextEnteredHandler) or 'TextEnteredHandler' (as in Fuse.Input.TextEnteredHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1528,1): Error E3114: There is no identifier named 'TextEnteredHandler' accessible in this scope. Did you mean 'TextEnteredHandler' (as in Fuse.Input.TextEnteredHandler) or 'TextEnteredHandler' (as in Fuse.Input.TextEnteredHandler)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1528): E3114: There is no identifier named 'TextEnteredArgs' accessible in this scope. Did you mean 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs) or 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/input/$.uno(1528,1): Error E3114: There is no identifier named 'TextEnteredArgs' accessible in this scope. Did you mean 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs) or 'TextEnteredArgs' (as in Fuse.Input.TextEnteredArgs)? For example, try adding 'using Fuse.Input;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3957): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3957,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3961): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3961,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Binding)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3962): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3962,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3964): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3964,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3973): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3973,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3978): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3978,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4007): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4007,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4013): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4013,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4022): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4022,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4032): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4032,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4032): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4032,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4040): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4040,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4050): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4050,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4062): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4062,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4079): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4079,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4079): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4079,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4098): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4098,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4100): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4100,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4100): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4100,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4118): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4118,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4424): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4424,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4424): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4424,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4449): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4449,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4465): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4465,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4498): E3114: There is no identifier named 'RootStage' accessible in this scope. Did you mean 'RootStage' (as in Fuse.RootStage) or 'RootStage' (as in Fuse.RootStage)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4498,1): Error E3114: There is no identifier named 'RootStage' accessible in this scope. Did you mean 'RootStage' (as in Fuse.RootStage) or 'RootStage' (as in Fuse.RootStage)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4551): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4551,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4564): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4564,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4637): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4637,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4637): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4637,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4645): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4645,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4645): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4645,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4675): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4675,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4700): E3002: Fuse.Node already has a static constructor
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4700,1): Error E3002: Fuse.Node already has a static constructor
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4733): E3114: There is no identifier named 'Context' accessible in this scope. Did you mean 'Context' (as in Fuse.Scripting.Context) or 'Context' (as in Outracks.Simulator.Context)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4733,1): Error E3114: There is no identifier named 'Context' accessible in this scope. Did you mean 'Context' (as in Fuse.Scripting.Context) or 'Context' (as in Outracks.Simulator.Context)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4733): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4733,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4807): E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4807,1): Error E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4810): E3114: There is no identifier named 'IScriptObject' accessible in this scope. Did you mean 'IScriptObject' (as in Fuse.Scripting.IScriptObject) or 'IScriptObject' (as in Fuse.Scripting.IScriptObject)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4810,1): Error E3114: There is no identifier named 'IScriptObject' accessible in this scope. Did you mean 'IScriptObject' (as in Fuse.Scripting.IScriptObject) or 'IScriptObject' (as in Fuse.Scripting.IScriptObject)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4815): E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4815,1): Error E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4815): E3114: There is no identifier named 'IScriptObject' accessible in this scope. Did you mean 'IScriptObject' (as in Fuse.Scripting.IScriptObject) or 'IScriptObject' (as in Fuse.Scripting.IScriptObject)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4815,1): Error E3114: There is no identifier named 'IScriptObject' accessible in this scope. Did you mean 'IScriptObject' (as in Fuse.Scripting.IScriptObject) or 'IScriptObject' (as in Fuse.Scripting.IScriptObject)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4820): E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4820,1): Error E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4820): E3111: Fuse.Scripting does not contain type or namespace 'IScriptObject'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4820,1): Error E3111: Fuse.Scripting does not contain type or namespace 'IScriptObject'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4826): E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4826,1): Error E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4828): E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4828,1): Error E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4837): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4837,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4840): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4840,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4846): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4846,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4856): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4856,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4867): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4867,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4897): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4897,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3957): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3957,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3961): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3961,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3962): E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(3962,1): Error E3114: There is no identifier named 'Binding' accessible in this scope. Did you mean 'Binding' (as in Fuse.Binding), 'Binding' (as in Fuse.Node.Binding) or 'Binding' (as in Fuse.Node.Binding), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4498): E3114: There is no identifier named 'RootStage' accessible in this scope. Did you mean 'RootStage' (as in Fuse.RootStage) or 'RootStage' (as in Fuse.RootStage)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4498,1): Error E3114: There is no identifier named 'RootStage' accessible in this scope. Did you mean 'RootStage' (as in Fuse.RootStage) or 'RootStage' (as in Fuse.RootStage)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4807): E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4807,1): Error E3111: Fuse.Scripting does not contain type or namespace 'Context'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4826): E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 2 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4826,1): Error E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 2 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4828): E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 2 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4828,1): Error E3114: There is no identifier named 'Properties' accessible in this scope. Did you mean 'Properties' (as in Fuse.IProperties.Properties), 'Properties' (as in Fuse.Properties) or 'Properties' (as in Fuse.Node.Properties), or one of 2 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4837): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4837,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4840): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4840,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4846): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4846,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4856): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4856,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5237): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5237,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5270): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5270,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5281): E3114: There is no identifier named 'PendingRemoveVisual' accessible in this scope. Did you mean 'PendingRemoveVisual' (as in Fuse.PendingRemoveVisual) or 'PendingRemoveVisual' (as in Fuse.PendingRemoveVisual)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5281,1): Error E3114: There is no identifier named 'PendingRemoveVisual' accessible in this scope. Did you mean 'PendingRemoveVisual' (as in Fuse.PendingRemoveVisual) or 'PendingRemoveVisual' (as in Fuse.PendingRemoveVisual)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5373): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5373,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5378): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5378,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5394): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5394,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410): E3114: There is no identifier named MiniList<> accessible in this scope. Did you mean MiniList`1 (as in Fuse.Internal.MiniList`1) or MiniList`1 (as in Fuse.Internal.MiniList`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410,1): Error E3114: There is no identifier named MiniList<> accessible in this scope. Did you mean MiniList`1 (as in Fuse.Internal.MiniList`1) or MiniList`1 (as in Fuse.Internal.MiniList`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5412): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5412,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5424): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5424,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5436): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5436,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5444): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5444,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5453): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5453,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5460): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5460,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5465): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5465,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5476): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5476,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5476): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5476,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5481): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5481,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5483): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5483,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5490): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5490,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5502): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5502,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5531): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5531,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5538): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5538,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5538): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5538,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5540): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5540,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5540): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5540,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5603): E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5603,1): Error E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5608): E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5608,1): Error E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5618): E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5618,1): Error E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5656): E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5656,1): Error E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5657): E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5657,1): Error E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5658): E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5658,1): Error E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5660): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5660,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5660): E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5660,1): Error E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5671): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5671,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5671): E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5671,1): Error E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5677): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5677,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5677): E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5677,1): Error E3114: There is no identifier named 'VisualBits' accessible in this scope. Did you mean 'VisualBits' (as in Fuse.Visual.VisualBits) or 'VisualBits' (as in Fuse.Visual.VisualBits)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5758): E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5758,1): Error E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5762): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5762,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5768): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5768,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5781): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5781,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5792): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5792,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5797): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5797,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5802): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5802,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5807): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5807,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5813): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5813,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5831): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5831,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5831): E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5831,1): Error E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5844): E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5844,1): Error E3114: There is no identifier named 'FastProperty1' accessible in this scope. Did you mean 'FastProperty1' (as in Fuse.FastProperty1) or 'FastProperty1' (as in Fuse.FastProperty1)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5844): E3114: There is no identifier named FastProperty1Link<> accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5844,1): Error E3114: There is no identifier named FastProperty1Link<> accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5911): E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5911,1): Error E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5914): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5914,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5920): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5920,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5933): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5933,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5944): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5944,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5949): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5949,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5954): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5954,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5959): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5959,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5965): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5965,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5983): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5983,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5983): E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5983,1): Error E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5996): E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5996,1): Error E3114: There is no identifier named 'FastProperty2' accessible in this scope. Did you mean 'FastProperty2' (as in Fuse.FastProperty2) or 'FastProperty2' (as in Fuse.FastProperty2)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5996): E3114: There is no identifier named FastProperty2Link<> accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5996,1): Error E3114: There is no identifier named FastProperty2Link<> accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6029): E3114: There is no identifier named 'HitTestTransformMode' accessible in this scope. Did you mean 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode) or 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6029,1): Error E3114: There is no identifier named 'HitTestTransformMode' accessible in this scope. Did you mean 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode) or 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6039): E3114: There is no identifier named 'HitTestContext' accessible in this scope. Did you mean 'HitTestContext' (as in Fuse.HitTestContext) or 'HitTestContext' (as in Fuse.HitTestContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6039,1): Error E3114: There is no identifier named 'HitTestContext' accessible in this scope. Did you mean 'HitTestContext' (as in Fuse.HitTestContext) or 'HitTestContext' (as in Fuse.HitTestContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6072): E3114: There is no identifier named 'HitTestContext' accessible in this scope. Did you mean 'HitTestContext' (as in Fuse.HitTestContext) or 'HitTestContext' (as in Fuse.HitTestContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6072,1): Error E3114: There is no identifier named 'HitTestContext' accessible in this scope. Did you mean 'HitTestContext' (as in Fuse.HitTestContext) or 'HitTestContext' (as in Fuse.HitTestContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6082): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6082,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6113): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6113,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6116): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6116,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6137): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6137,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6145): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6145,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6175): E3114: There is no identifier named 'InteractionItem' accessible in this scope. Did you mean 'InteractionItem' (as in Fuse.Visual.InteractionItem) or 'InteractionItem' (as in Fuse.Visual.InteractionItem)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6175,1): Error E3114: There is no identifier named 'InteractionItem' accessible in this scope. Did you mean 'InteractionItem' (as in Fuse.Visual.InteractionItem) or 'InteractionItem' (as in Fuse.Visual.InteractionItem)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6221): E3114: There is no identifier named 'CancelInteractionsType' accessible in this scope. Did you mean 'CancelInteractionsType' (as in Fuse.Visual.CancelInteractionsType) or 'CancelInteractionsType' (as in Fuse.Visual.CancelInteractionsType)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6221,1): Error E3114: There is no identifier named 'CancelInteractionsType' accessible in this scope. Did you mean 'CancelInteractionsType' (as in Fuse.Visual.CancelInteractionsType) or 'CancelInteractionsType' (as in Fuse.Visual.CancelInteractionsType)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6262): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6262,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6449): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6449,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6597): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6597,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6602): E3114: There is no identifier named 'Layer' accessible in this scope. Did you mean 'Layer' (as in Fuse.Visual.Layer), 'Layer' (as in Fuse.Layer) or 'Layer' (as in Fuse.Layer)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6602,1): Error E3114: There is no identifier named 'Layer' accessible in this scope. Did you mean 'Layer' (as in Fuse.Visual.Layer), 'Layer' (as in Fuse.Layer) or 'Layer' (as in Fuse.Layer)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6619): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6619,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6624): E3114: There is no identifier named 'LayoutRole' accessible in this scope. Did you mean 'LayoutRole' (as in Fuse.Visual.LayoutRole), 'LayoutRole' (as in Fuse.LayoutRole) or 'LayoutRole' (as in Fuse.LayoutRole)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6624,1): Error E3114: There is no identifier named 'LayoutRole' accessible in this scope. Did you mean 'LayoutRole' (as in Fuse.Visual.LayoutRole), 'LayoutRole' (as in Fuse.LayoutRole) or 'LayoutRole' (as in Fuse.LayoutRole)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6645): E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6645,1): Error E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6654): E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6654,1): Error E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6656): E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6656,1): Error E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6675): E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6675,1): Error E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6756): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6756,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6756): E3114: There is no identifier named 'LayoutDependent' accessible in this scope. Did you mean 'LayoutDependent' (as in Fuse.LayoutDependent) or 'LayoutDependent' (as in Fuse.LayoutDependent)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6756,1): Error E3114: There is no identifier named 'LayoutDependent' accessible in this scope. Did you mean 'LayoutDependent' (as in Fuse.LayoutDependent) or 'LayoutDependent' (as in Fuse.LayoutDependent)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6760): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6760,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6760): E3114: There is no identifier named 'LayoutDependent' accessible in this scope. Did you mean 'LayoutDependent' (as in Fuse.LayoutDependent) or 'LayoutDependent' (as in Fuse.LayoutDependent)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6760,1): Error E3114: There is no identifier named 'LayoutDependent' accessible in this scope. Did you mean 'LayoutDependent' (as in Fuse.LayoutDependent) or 'LayoutDependent' (as in Fuse.LayoutDependent)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6918): E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6918,1): Error E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6932): E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6932,1): Error E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6943): E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6943,1): Error E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7001): E3114: There is no identifier named 'RequestBringIntoViewHandler' accessible in this scope. Did you mean 'RequestBringIntoViewHandler' (as in Fuse.RequestBringIntoViewHandler) or 'RequestBringIntoViewHandler' (as in Fuse.RequestBringIntoViewHandler)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7001,1): Error E3114: There is no identifier named 'RequestBringIntoViewHandler' accessible in this scope. Did you mean 'RequestBringIntoViewHandler' (as in Fuse.RequestBringIntoViewHandler) or 'RequestBringIntoViewHandler' (as in Fuse.RequestBringIntoViewHandler)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7003): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7003,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7056): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7056,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7172): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7172,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7183): E3114: There is no identifier named 'Function' accessible in this scope. Did you mean 'Function' (as in Fuse.Scripting.Function) or 'Function' (as in Fuse.Scripting.Function)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7183,1): Error E3114: There is no identifier named 'Function' accessible in this scope. Did you mean 'Function' (as in Fuse.Scripting.Function) or 'Function' (as in Fuse.Scripting.Function)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7185): E3114: There is no identifier named 'Function' accessible in this scope. Did you mean 'Function' (as in Fuse.Scripting.Function) or 'Function' (as in Fuse.Scripting.Function)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7185,1): Error E3114: There is no identifier named 'Function' accessible in this scope. Did you mean 'Function' (as in Fuse.Scripting.Function) or 'Function' (as in Fuse.Scripting.Function)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7238): E3002: Fuse.Visual already has a static constructor
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7238,1): Error E3002: Fuse.Visual already has a static constructor
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7257): E3114: There is no identifier named 'ParameterProperty' accessible in this scope. Did you mean 'ParameterProperty' (as in Fuse.Visual.ParameterProperty) or 'ParameterProperty' (as in Fuse.Visual.ParameterProperty)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7257,1): Error E3114: There is no identifier named 'ParameterProperty' accessible in this scope. Did you mean 'ParameterProperty' (as in Fuse.Visual.ParameterProperty) or 'ParameterProperty' (as in Fuse.Visual.ParameterProperty)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7258): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7258,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7270): E3114: There is no identifier named 'Context' accessible in this scope. Did you mean 'Context' (as in Fuse.Scripting.Context) or 'Context' (as in Outracks.Simulator.Context)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7270,1): Error E3114: There is no identifier named 'Context' accessible in this scope. Did you mean 'Context' (as in Fuse.Scripting.Context) or 'Context' (as in Outracks.Simulator.Context)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7270): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7270,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7296): E3114: There is no identifier named 'Context' accessible in this scope. Did you mean 'Context' (as in Fuse.Scripting.Context) or 'Context' (as in Outracks.Simulator.Context)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7296,1): Error E3114: There is no identifier named 'Context' accessible in this scope. Did you mean 'Context' (as in Fuse.Scripting.Context) or 'Context' (as in Outracks.Simulator.Context)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7296): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7296,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7330): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7330,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7331): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7331,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7332): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7332,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7340): E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7340,1): Error E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7347): E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7347,1): Error E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7354): E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7354,1): Error E3114: There is no identifier named 'Transform' accessible in this scope. Did you mean 'Transform' (as in Fuse.Transform) or 'Transform' (as in Fuse.Transform)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7380): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7380,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7394): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7394,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7426): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7426,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7427): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7427,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7437): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7437,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7442): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7442,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7451): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7451,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7453): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7453,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7466): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7466,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7472): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7472,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7485): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7485,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7497): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7497,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7526): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7526,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7539): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7539,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7545): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7545,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7575): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7575,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7609): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7609,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7736): E3114: There is no identifier named 'VisualContext' accessible in this scope. Did you mean 'VisualContext' (as in Fuse.Visual.VisualContext), 'VisualContext' (as in Fuse.VisualContext) or 'VisualContext' (as in Fuse.VisualContext)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7736,1): Error E3114: There is no identifier named 'VisualContext' accessible in this scope. Did you mean 'VisualContext' (as in Fuse.Visual.VisualContext), 'VisualContext' (as in Fuse.VisualContext) or 'VisualContext' (as in Fuse.VisualContext)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7749): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7749,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7806): E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7806,1): Error E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7860): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7860,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7906): E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7906,1): Error E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7920): E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7920,1): Error E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7994): E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7994,1): Error E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7998): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7998,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8008): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8008,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8025): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8025,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8049): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8049,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8055): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8055,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8065): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8065,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8070): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8070,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8091): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8091,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8109): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8109,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8109): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8109,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8120): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8120,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8172): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8172,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5373): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5373,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410): E3114: There is no identifier named MiniList<> accessible in this scope. Did you mean MiniList`1 (as in Fuse.Internal.MiniList`1) or MiniList`1 (as in Fuse.Internal.MiniList`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410,1): Error E3114: There is no identifier named MiniList<> accessible in this scope. Did you mean MiniList`1 (as in Fuse.Internal.MiniList`1) or MiniList`1 (as in Fuse.Internal.MiniList`1)? For example, try adding 'using Fuse.Internal;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5410,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.Node)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5758): E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5758,1): Error E3114: There is no identifier named 'FastProperty1Link' accessible in this scope. Did you mean 'FastProperty1Link' (as in Fuse.FastProperty1Link), FastProperty1Link`1 (as in Fuse.FastProperty1Link`1) or 'FastProperty1Link' (as in Fuse.FastProperty1Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5911): E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(5911,1): Error E3114: There is no identifier named 'FastProperty2Link' accessible in this scope. Did you mean 'FastProperty2Link' (as in Fuse.FastProperty2Link), FastProperty2Link`1 (as in Fuse.FastProperty2Link`1) or 'FastProperty2Link' (as in Fuse.FastProperty2Link), or one of 1 other similar candidates? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6029): E3114: There is no identifier named 'HitTestTransformMode' accessible in this scope. Did you mean 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode) or 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6029,1): Error E3114: There is no identifier named 'HitTestTransformMode' accessible in this scope. Did you mean 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode) or 'HitTestTransformMode' (as in Fuse.Visual.HitTestTransformMode)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6113): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6113,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6116): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6116,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6137): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6137,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6145): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6145,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6175): E3114: There is no identifier named 'InteractionItem' accessible in this scope. Did you mean 'InteractionItem' (as in Fuse.Visual.InteractionItem) or 'InteractionItem' (as in Fuse.Visual.InteractionItem)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6175,1): Error E3114: There is no identifier named 'InteractionItem' accessible in this scope. Did you mean 'InteractionItem' (as in Fuse.Visual.InteractionItem) or 'InteractionItem' (as in Fuse.Visual.InteractionItem)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6602): E3114: There is no identifier named 'Layer' accessible in this scope. Did you mean 'Layer' (as in Fuse.Visual.Layer), 'Layer' (as in Fuse.Visual.Layer) or 'Layer' (as in Fuse.Layer), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6602,1): Error E3114: There is no identifier named 'Layer' accessible in this scope. Did you mean 'Layer' (as in Fuse.Visual.Layer), 'Layer' (as in Fuse.Visual.Layer) or 'Layer' (as in Fuse.Layer), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6624): E3114: There is no identifier named 'LayoutRole' accessible in this scope. Did you mean 'LayoutRole' (as in Fuse.Visual.LayoutRole), 'LayoutRole' (as in Fuse.Visual.LayoutRole) or 'LayoutRole' (as in Fuse.LayoutRole), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6624,1): Error E3114: There is no identifier named 'LayoutRole' accessible in this scope. Did you mean 'LayoutRole' (as in Fuse.Visual.LayoutRole), 'LayoutRole' (as in Fuse.Visual.LayoutRole) or 'LayoutRole' (as in Fuse.LayoutRole), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6654): E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6654,1): Error E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6656): E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6656,1): Error E3114: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6918): E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6918,1): Error E3114: There is no identifier named 'LayoutParams' accessible in this scope. Did you mean 'LayoutParams' (as in Fuse.LayoutParams) or 'LayoutParams' (as in Fuse.LayoutParams)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7183): E3114: There is no identifier named 'Function' accessible in this scope. Did you mean 'Function' (as in Fuse.Scripting.Function) or 'Function' (as in Fuse.Scripting.Function)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7183,1): Error E3114: There is no identifier named 'Function' accessible in this scope. Did you mean 'Function' (as in Fuse.Scripting.Function) or 'Function' (as in Fuse.Scripting.Function)? For example, try adding 'using Fuse.Scripting;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7257): E3114: There is no identifier named 'ParameterProperty' accessible in this scope. Did you mean 'ParameterProperty' (as in Fuse.Visual.ParameterProperty) or 'ParameterProperty' (as in Fuse.Visual.ParameterProperty)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7257,1): Error E3114: There is no identifier named 'ParameterProperty' accessible in this scope. Did you mean 'ParameterProperty' (as in Fuse.Visual.ParameterProperty) or 'ParameterProperty' (as in Fuse.Visual.ParameterProperty)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7394): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7394,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7426): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7426,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7427): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7427,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7437): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7437,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7442): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7442,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7451): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7451,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7453): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7453,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7466): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7466,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7472): E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7472,1): Error E3114: There is no identifier named 'FastMatrix' accessible in this scope. Did you mean 'FastMatrix' (as in Fuse.FastMatrix) or 'FastMatrix' (as in Fuse.FastMatrix)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7575): E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7575,1): Error E3114: There is no identifier named 'VisualBounds' accessible in this scope. Did you mean 'VisualBounds' (as in Fuse.VisualBounds) or 'VisualBounds' (as in Fuse.VisualBounds)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7736): E3114: There is no identifier named 'VisualContext' accessible in this scope. Did you mean 'VisualContext' (as in Fuse.Visual.VisualContext), 'VisualContext' (as in Fuse.Visual.VisualContext) or 'VisualContext' (as in Fuse.VisualContext), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7736,1): Error E3114: There is no identifier named 'VisualContext' accessible in this scope. Did you mean 'VisualContext' (as in Fuse.Visual.VisualContext), 'VisualContext' (as in Fuse.Visual.VisualContext) or 'VisualContext' (as in Fuse.VisualContext), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7749): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7749,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7806): E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7806,1): Error E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7920): E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7920,1): Error E3114: There is no identifier named 'IViewport' accessible in this scope. Did you mean 'IViewport' (as in Fuse.IViewport) or 'IViewport' (as in Fuse.IViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7998): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7998,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8025): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8025,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8055): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8055,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8065): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(8065,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual) or 'Visual' (as in Fuse.Visual)? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6676): E3102: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6676,1): Error E3102: There is no identifier named 'InvalidateLayoutReason' accessible in this scope. Did you mean 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason) or 'InvalidateLayoutReason' (as in Fuse.InvalidateLayoutReason)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4710): E3111: Fuse.Scripting does not contain type or namespace 'Function'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4710,1): Error E3111: Fuse.Scripting does not contain type or namespace 'Function'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4712): E3111: Fuse.Scripting does not contain type or namespace 'Function'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4712,1): Error E3111: Fuse.Scripting does not contain type or namespace 'Function'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4710): E3111: Fuse.Scripting does not contain type or namespace 'Function'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(4710,1): Error E3111: Fuse.Scripting does not contain type or namespace 'Function'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6095): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 2 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6095,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 2 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6096): E3114: There is no identifier named 'HitTestResult' accessible in this scope. Did you mean 'HitTestResult' (as in Fuse.HitTestResult) or 'HitTestResult' (as in Fuse.HitTestResult)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6096,1): Error E3114: There is no identifier named 'HitTestResult' accessible in this scope. Did you mean 'HitTestResult' (as in Fuse.HitTestResult) or 'HitTestResult' (as in Fuse.HitTestResult)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6095): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(6095,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7248): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7248,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7254): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7254,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7248): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(7248,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 3 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(13): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 4 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(13,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 4 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(15): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 4 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(15,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 4 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(35): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node) or 'Node' (as in Fuse.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(35,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node) or 'Node' (as in Fuse.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(39): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node) or 'Node' (as in Fuse.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(39,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node) or 'Node' (as in Fuse.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(67): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(67,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(13): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(13,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(15): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(15,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(35): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(35,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(39): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(39,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(67): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(67,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(174): E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.RootViewport)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(174,1): Error E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.RootViewport)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(241): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(241,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(243): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(243,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(254): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(254,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(286): E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(286,1): Error E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(312): E3114: There is no identifier named 'UnhandledExceptionHandler' accessible in this scope. Did you mean 'UnhandledExceptionHandler' (as in Fuse.UnhandledExceptionHandler) or 'UnhandledExceptionHandler' (as in Fuse.UnhandledExceptionHandler)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(312,1): Error E3114: There is no identifier named 'UnhandledExceptionHandler' accessible in this scope. Did you mean 'UnhandledExceptionHandler' (as in Fuse.UnhandledExceptionHandler) or 'UnhandledExceptionHandler' (as in Fuse.UnhandledExceptionHandler)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(344): E3114: There is no identifier named 'AppBase' accessible in this scope. Did you mean 'AppBase' (as in Fuse.AppBase) or 'AppBase' (as in Fuse.AppBase)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(344,1): Error E3114: There is no identifier named 'AppBase' accessible in this scope. Did you mean 'AppBase' (as in Fuse.AppBase) or 'AppBase' (as in Fuse.AppBase)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(350): E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(350,1): Error E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(351): E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(351,1): Error E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(356): E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(356,1): Error E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(394): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(394,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(400): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(400,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(174): E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(174,1): Error E3114: There is no identifier named 'RootViewport' accessible in this scope. Did you mean 'RootViewport' (as in Fuse.AppBase.RootViewport), 'RootViewport' (as in Fuse.RootViewport) or 'RootViewport' (as in Fuse.AppBase.RootViewport), or one of 1 other similar candidates?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(241): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(241,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(394): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(394,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(400): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(400,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(449): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(449,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(454): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(454,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(449): E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(449,1): Error E3114: There is no identifier named 'Node' accessible in this scope. Did you mean 'Node' (as in Fuse.AlternateRoot.Node), 'Node' (as in Fuse.Node) or 'Node' (as in Fuse.AlternateRoot.Node)?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(616): E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(616,1): Error E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(649): E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(649,1): Error E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(616): E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(616,1): Error E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(713): E3114: There is no identifier named 'DiagnosticHandler' accessible in this scope. Did you mean 'DiagnosticHandler' (as in Fuse.DiagnosticHandler) or 'DiagnosticHandler' (as in Fuse.DiagnosticHandler)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(713,1): Error E3114: There is no identifier named 'DiagnosticHandler' accessible in this scope. Did you mean 'DiagnosticHandler' (as in Fuse.DiagnosticHandler) or 'DiagnosticHandler' (as in Fuse.DiagnosticHandler)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(715): E3114: There is no identifier named 'Diagnostic' accessible in this scope. Did you mean 'Diagnostic' (as in Fuse.Diagnostic) or 'Diagnostic' (as in Fuse.Diagnostic)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(715,1): Error E3114: There is no identifier named 'Diagnostic' accessible in this scope. Did you mean 'Diagnostic' (as in Fuse.Diagnostic) or 'Diagnostic' (as in Fuse.Diagnostic)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(736): E3111: Fuse.Scripting does not contain type or namespace 'ScriptException'. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(736,1): Error E3111: Fuse.Scripting does not contain type or namespace 'ScriptException'. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(841): E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(841,1): Error E3114: There is no identifier named 'DiagnosticType' accessible in this scope. Did you mean 'DiagnosticType' (as in Fuse.DiagnosticType) or 'DiagnosticType' (as in Fuse.DiagnosticType)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(863): E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(863,1): Error E3114: There is no identifier named 'DrawContext' accessible in this scope. Did you mean 'DrawContext' (as in Fuse.DrawContext) or 'DrawContext' (as in Fuse.DrawContext)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(885): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(885,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(887): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(887,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(892): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(892,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(893): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(893,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(906): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(906,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(916): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(916,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(995): E3114: There is no identifier named 'RenderTargetEntry' accessible in this scope. Did you mean 'RenderTargetEntry' (as in Fuse.RenderTargetEntry) or 'RenderTargetEntry' (as in Fuse.RenderTargetEntry)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(995,1): Error E3114: There is no identifier named 'RenderTargetEntry' accessible in this scope. Did you mean 'RenderTargetEntry' (as in Fuse.RenderTargetEntry) or 'RenderTargetEntry' (as in Fuse.RenderTargetEntry)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1023): E3114: There is no identifier named 'RenderTargetEntry' accessible in this scope. Did you mean 'RenderTargetEntry' (as in Fuse.RenderTargetEntry) or 'RenderTargetEntry' (as in Fuse.RenderTargetEntry)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1023,1): Error E3114: There is no identifier named 'RenderTargetEntry' accessible in this scope. Did you mean 'RenderTargetEntry' (as in Fuse.RenderTargetEntry) or 'RenderTargetEntry' (as in Fuse.RenderTargetEntry)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1069): E3114: There is no identifier named 'IFrustum' accessible in this scope. Did you mean 'IFrustum' (as in Fuse.IFrustum) or 'IFrustum' (as in Fuse.IFrustum)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1069,1): Error E3114: There is no identifier named 'IFrustum' accessible in this scope. Did you mean 'IFrustum' (as in Fuse.IFrustum) or 'IFrustum' (as in Fuse.IFrustum)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1075): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(1075,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(885): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(885,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(887): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(887,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(892): E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(892,1): Error E3114: There is no identifier named 'IRenderViewport' accessible in this scope. Did you mean 'IRenderViewport' (as in Fuse.IRenderViewport) or 'IRenderViewport' (as in Fuse.IRenderViewport)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(995): E3114: There is no identifier named 'RenderTargetEntry' accessible in this scope. Did you mean 'RenderTargetEntry' (as in Fuse.RenderTargetEntry) or 'RenderTargetEntry' (as in Fuse.RenderTargetEntry)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(995,1): Error E3114: There is no identifier named 'RenderTargetEntry' accessible in this scope. Did you mean 'RenderTargetEntry' (as in Fuse.RenderTargetEntry) or 'RenderTargetEntry' (as in Fuse.RenderTargetEntry)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2098): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2098,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2100): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2100,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2111): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2111,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2120): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2120,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2122): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2122,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2127): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2127,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2143): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2143,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2152): E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2152,1): Error E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2157): E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2157,1): Error E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2158): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2158,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2163): E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2163,1): Error E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2168): E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2168,1): Error E3114: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2169): E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2169,1): Error E3114: There is no identifier named 'Visual' accessible in this scope. Did you mean 'Visual' (as in Fuse.Controls.Graphics.Visual), 'Visual' (as in Fuse.AlternateRoot.Visual) or 'Visual' (as in Fuse.VisualEventArgs.Visual), or one of 5 other similar candidates? For example, try adding 'using Fuse.Controls.Graphics;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2120): E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2120,1): Error E3114: There is no identifier named 'PropertyHandle' accessible in this scope. Did you mean 'PropertyHandle' (as in Fuse.PropertyHandle) or 'PropertyHandle' (as in Fuse.PropertyHandle)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2152): E3102: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2152,1): Error E3102: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
../../Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2163): E3102: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
/Users/jhsware/Library/Application Support/Fusetools/Packages/FuseCore/0.46.1/$.uno(2163,1): Error E3102: There is no identifier named 'VisualEventMode' accessible in this scope. Did you mean 'VisualEventMode' (as in Fuse.VisualEventMode) or 'VisualEventMode' (as in Fuse.VisualEventMode)? For example, try adding 'using Fuse;' to the top of the code file. Could you be missing a package reference?
Components/SettingsSwitch.ux(12): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(12,1): Error E8001: Data type not found: Change
Components/SettingsSwitch.ux(12): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(12,1): Error E8001: Could not resolve type 'Change'
Components/SettingsSwitch.ux(13): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(13,1): Error E8001: Data type not found: Change
Components/SettingsSwitch.ux(13): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(13,1): Error E8001: Could not resolve type 'Change'
Components/SettingsSwitch.ux(14): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(14,1): Error E8001: Data type not found: Change
Components/SettingsSwitch.ux(14): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(14,1): Error E8001: Could not resolve type 'Change'
Components/SettingsSwitch.ux(40): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(40,1): Error E8001: Data type not found: Change
Components/SettingsSwitch.ux(40): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(40,1): Error E8001: Could not resolve type 'Change'
Components/SettingsSwitch.ux(41): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(41,1): Error E8001: Data type not found: Change
Components/SettingsSwitch.ux(41): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Components/SettingsSwitch.ux(41,1): Error E8001: Could not resolve type 'Change'
Pages/Settings/FacebookLogin.ux(24): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/FacebookLogin.ux(24,1): Error E8001: Data type not found: Change
Pages/Settings/FacebookLogin.ux(24): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/FacebookLogin.ux(24,1): Error E8001: Could not resolve type 'Change'
Pages/Settings/GpsSettings.ux(14): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/GpsSettings.ux(14,1): Error E8001: Data type not found: Change
Pages/Settings/GpsSettings.ux(14): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/GpsSettings.ux(14,1): Error E8001: Could not resolve type 'Change'
Pages/Settings/GpsSettings.ux(15): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/GpsSettings.ux(15,1): Error E8001: Data type not found: Change
Pages/Settings/GpsSettings.ux(15): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/GpsSettings.ux(15,1): Error E8001: Could not resolve type 'Change'
Pages/Settings/ShowBadge.ux(20): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowBadge.ux(20,1): Error E8001: Data type not found: Change
Pages/Settings/ShowBadge.ux(20): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowBadge.ux(20,1): Error E8001: Could not resolve type 'Change'
Pages/Settings/ShowBadge.ux(21): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowBadge.ux(21,1): Error E8001: Data type not found: Change
Pages/Settings/ShowBadge.ux(21): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowBadge.ux(21,1): Error E8001: Could not resolve type 'Change'
Pages/Settings/ShowFacebookLogin.ux(22): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowFacebookLogin.ux(22,1): Error E8001: Data type not found: Change
Pages/Settings/ShowFacebookLogin.ux(22): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowFacebookLogin.ux(22,1): Error E8001: Could not resolve type 'Change'
Pages/Settings/ShowFacebookLogin.ux(23): E8001: Data type not found: Change
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowFacebookLogin.ux(23,1): Error E8001: Data type not found: Change
Pages/Settings/ShowFacebookLogin.ux(23): E8001: Could not resolve type 'Change'
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowFacebookLogin.ux(23,1): Error E8001: Could not resolve type 'Change'
Components/Clock.ux(6): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Components/Clock.ux(6,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Components/CurrentWeek.ux(6): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Components/CurrentWeek.ux(6,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Components/TitleBar.ux(7): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Components/TitleBar.ux(7,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Components/TrackClick.ux(7): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Components/TrackClick.ux(7,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Components/TrackPageView.ux(5): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Components/TrackPageView.ux(5,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Components/TrackScreenView.ux(4): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Components/TrackScreenView.ux(4,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Pages/Events/EventDetailsPage.ux(8): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Events/EventDetailsPage.ux(8,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Pages/Events/EventsPage.ux(53): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Events/EventsPage.ux(53,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Events/HTMLDetailsPage.ux(5): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Events/HTMLDetailsPage.ux(5,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Pages/Events/HTMLDetailsPage.ux(14): E8001: Node of type 'Fuse.Triggers.Actions.EvaluateJS (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Events/HTMLDetailsPage.ux(14,1): Error E8001: Node of type 'Fuse.Triggers.Actions.EvaluateJS (reflector)' does not support string content
Pages/Settings/AppSettingsButton.ux(2): E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/AppSettingsButton.ux(2,1): Error E8001: Node of type 'Fuse.Reactive.JavaScript (reflector)' does not support string content
Pages/Settings/AppSettingsButton.ux(14): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/AppSettingsButton.ux(14,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/Facebook.ux(5): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/Facebook.ux(5,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/Facebook.ux(10): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/Facebook.ux(10,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/FacebookLogin.ux(17): E8001: Node of type 'Fuse.Triggers.Actions.EvaluateJS (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/FacebookLogin.ux(17,1): Error E8001: Node of type 'Fuse.Triggers.Actions.EvaluateJS (reflector)' does not support string content
Pages/Settings/GpsSettings.ux(6): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/GpsSettings.ux(6,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/GpsSettings.ux(8): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/GpsSettings.ux(8,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/GpsSettings.ux(10): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/GpsSettings.ux(10,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/SettingsPage.ux(22): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/SettingsPage.ux(22,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/SettingsPage.ux(24): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/SettingsPage.ux(24,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/ShowBadge.ux(6): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowBadge.ux(6,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/ShowBadge.ux(15): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowBadge.ux(15,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/ShowBadge.ux(17): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowBadge.ux(17,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/ShowFacebookLogin.ux(8): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowFacebookLogin.ux(8,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/ShowFacebookLogin.ux(17): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowFacebookLogin.ux(17,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Pages/Settings/ShowFacebookLogin.ux(19): E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
/Users/jhsware/Fuse/Veckoappen/Pages/Settings/ShowFacebookLogin.ux(19,1): Error E8001: Node of type 'Fuse.Controls.Text (reflector)' does not support string content
Veckoappen.unoproj: E0000: Object reference not set to an instance of an object
/Users/jhsware/Fuse/Veckoappen/Veckoappen.unoproj(1,1): Error E0000: Object reference not set to an instance of an object
Build completed in 5.66 seconds
551 errors
Build ended
fuse: Failed to compile project
Here is the contents of https://api.fusetools.com/packages/v1/nuget/v2
<service xmlns="http://www.w3.org/2007/app" xmlns:atom="http://www.w3.org/2005/Atom" xml:base="https://api.fusetools.com/packages/v1/nuget/v2/">
<workspace>
<atom:title>Default</atom:title>
<collection href="Packages">
<atom:title>Packages</atom:title>
</collection>
<collection href="Screenshots">
<atom:title>Screenshots</atom:title>
</collection>
</workspace>
</service>
I see there’s already an issue for this posted on there. I’ll see if I can put up a patch tonight.