# Fuse slack channel?

**URL:** <https://forums.fusetools.com/t/fuse-slack-channel/2301>\
**Category:** General\
**Created:** [July 22, 2015, 8:13pm UTC](https://forums.fusetools.com/t/fuse-slack-channel/2301 "2015-07-22T20:13:45Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![eric](https://avatars.discourse-cdn.com/v4/letter/e/898d66/32.png) [@eric](https://forums.fusetools.com/u/eric)\
**Post date:** [July 22, 2015, 8:13pm UTC](https://forums.fusetools.com/t/fuse-slack-channel/2301/1 "2015-07-22T20:13:45Z")

</div>

It would be awesome if fuse had a fuse-community slack channel. The folks at [keen.io](http://keen.io) and [tutum.co](http://tutum.co) have a slack channel and developers just sit in there and help each other out. Food for thought. 😃

---

<div class="post-metadata">

**Author:** ![Anders\_Lassen](https://yyz1.discourse-cdn.com/flex035/user_avatar/forums.fusetools.com/anders_lassen/32/522_2.png) [@Anders\_Lassen](https://forums.fusetools.com/u/Anders_Lassen)\
**Post date:** [July 22, 2015, 8:28pm UTC](https://forums.fusetools.com/t/fuse-slack-channel/2301/2 "2015-07-22T20:28:59Z")

</div>

There already is one. If you send a mail to [support@fusetools.com](mailto:support@fusetools.com) with your slack email, you might get lucky 🙂

---

<div class="post-metadata">

**Author:** ![Bent](https://yyz1.discourse-cdn.com/flex035/user_avatar/forums.fusetools.com/bent/32/157_2.png) [@Bent](https://forums.fusetools.com/u/Bent)\
**Post date:** [July 28, 2015, 4:11pm UTC](https://forums.fusetools.com/t/fuse-slack-channel/2301/3 "2015-07-28T16:11:06Z")

</div>

We’re actually in the process of setting up a full community on Slack, so the invites are going to have to wait a little longer. Turns out trying to keep up with everyone in a single Slack channel on our internal Slack setup wasn’t an ideal solution. 🙂

Anyway, I’ll be sure to let the community know when we’re ready to invite people to it!

---

<div class="post-metadata">

**Author:** ![Bent](https://yyz1.discourse-cdn.com/flex035/user_avatar/forums.fusetools.com/bent/32/157_2.png) [@Bent](https://forums.fusetools.com/u/Bent)\
**Post date:** [July 31, 2015, 1:04pm UTC](https://forums.fusetools.com/t/fuse-slack-channel/2301/4 "2015-07-31T13:04:11Z")

</div>

Just an update: we’ve set up most of what’s required for this, but it’ll be a week or so before it’s operational. I’ll be sure to update this thread when it’s done.

---

<div class="post-metadata">

**Author:** ![eric](https://avatars.discourse-cdn.com/v4/letter/e/898d66/32.png) [@eric](https://forums.fusetools.com/u/eric)\
**Post date:** [July 31, 2015, 9:48pm UTC](https://forums.fusetools.com/t/fuse-slack-channel/2301/5 "2015-07-31T21:48:56Z")

</div>

Thanks Bent looking forward to it!

I was preferring a community slack similar to the #startup channel 🙂

---

<div class="post-metadata">

**Author:** ![Bent](https://yyz1.discourse-cdn.com/flex035/user_avatar/forums.fusetools.com/bent/32/157_2.png) [@Bent](https://forums.fusetools.com/u/Bent)\
**Post date:** [August 12, 2015, 8:34am UTC](https://forums.fusetools.com/t/fuse-slack-channel/2301/6 "2015-08-12T08:34:43Z")

</div>

Hi Eric,

The Fuse Community on Slack is now operational, and you can invite yourself using this link: [http://slackcommunity.fusetools.com/](http://slackcommunity.fusetools.com/)